甘青地区马家窑文化彩陶贸易及其动力探讨     

崔一付  杨谊时  张山佳  李国林  李冀源  陈国科 《第四纪研究》2020,(2):538-546

马家窑文化是甘青地区仰韶文化晚期阶段一个重要的文化遗存类型,其以精美的彩陶闻名于世,对于马家窑文化彩陶的交流传播研究受到了学术界的广泛关注.本文运用X-荧光光谱分析法对甘青地区5个典型马家窑文化早期阶段遗址出土的92件彩陶陶片样品和各遗址附近采集的42份红粘土及黄土样品进行化学元素组成分析,追溯彩陶的产源地及贸易.同时基于陶器的起源传播理论,收集整理马家窑文化区遗址出土的粟(Setaria italica)、黍(Panicum miliaceum)农作物以及动物骨骼遗存鉴定资料,探讨马家窑彩陶贸易的动力.Ti/Al-Na/K和主成分分析结果显示宗日文化区宗日遗址的马家窑文化彩陶元素组成特征和马家窑文化主体区域的彩陶一致,表明宗日遗址马家窑类型彩陶是从马家窑文化主体区域贸易而来;马家窑文化彩陶的传播和该地区粟黍农作物的交流传播具有时空一致性,粟黍农业人群沿黄河上游谷地向共和盆地的扩散带来了新的文化元素;宗日文化区和马家窑文化核心区生业模式的差异带来了跨区域间文化交流的动力,这也可能是马家窑文化彩陶贸易的动力.  相似文献   

燕山中部大地热流及岩石圈热结构特征——以承德市七家- 茅荆坝地热田为例     

刘峰  王贵玲  张薇  岳晨  陆川  黄起伟  欧小科 《地质学报》2020,94(7):1950-1959

燕山中部地区地热资源丰富,地热地质条件较好,但该地区大地热流测量工作较少,岩石圈热结构研究尚未开展,制约了该地区的地热地质研究与资源勘探开发。本文以该地区的七家-茅荆坝地热田为典型区,结合地温测井、取样测试、数据收集与分析,初步查明燕山中部大地热流特征及浅部-深部岩层热物性特征,填补了大地热流值测量空白区,在此基础上建立了研究区热结构概念模型,估算其深部地温分布。研究得出燕山中部大地热流值变化较大,平均约57 mW/m~2,与周边温泉水温存在较好的相关关系。其中七家-茅荆坝地热田大地热流值较高,为74.9 mW/m~2。通过深部地温分布计算得出七家—茅荆坝地区居里面埋深为21.5～22.8 km,莫霍面温度约815℃,分析结果与前人研究成果较为一致,验证了本文所建立岩石圈热结构模型的准确性。  相似文献   

青海省东北部地区中晚全新世人类对动物资源的获取与利用——以青海湖盆地尖嘴遗址为例     

陈晓良  刘向军  侯光良 《第四纪研究》2020,(2):367-378

青海省东北部地区复杂多样的地貌类型,为研究史前人类适应不同自然环境下的动物资源利用提供了条件.然而,已开展的动物考古研究主要聚焦在青海省东北部的河谷农业区,对于草原地带的研究相对薄弱,其先民对草原环境中的适应策略仍未得到充分讨论.本文选择农牧过渡带的青海湖盆地尖嘴遗址出土动物骨骼为研究对象,运用AMS 14C测年方法、动物种属鉴定和可鉴定标本数(NISP)统计,确认尖嘴遗址(3.2 ka B.P.左右)是一处卡约文化早期的人类活动遗迹,其先民以狩猎活动为主要生业策略,渔猎作为辅助生计,属"初级开发型"模式.在此基础上,结合青海省东北部地区已有动物研究资料,探讨了中晚全新世(8.0~2.0 ka B.P.)以来的动物资源获取利用及家畜饲养状态.结果显示:8.0~6.0 ka B.P.,本区先民以纯粹的狩猎经济为主,其猎取对象则为中小型哺乳动物,属"依赖型"生业模式;6.0~4.0 ka B.P.,本区先民获取动物资源方式仍以狩猎为主,并开始出现一定规模的家畜饲养(猪和狗),其生业属低水平的食物生产阶段,获取肉食资源的模式处于"初级开发型"阶段;4.0~2.0 ka B.P.,史前东西方文化交流的不断增强,驯化于西亚的家畜牲畜牛羊传入至青海省东北部地区,使得该区先民利用动物资源方式呈现多元化,构成了"初级开发型"和"开发型"两种生业模式,牛羊成为家畜饲养的主流.总体来讲,中晚全新世以来青海省东北部地区先民获取肉食资源的方式大致经历了由以狩猎-采集方式到家畜饲养方式的历时性转变,不同区域的自然环境差异及史前欧亚大陆东西方文化间的交流是起决定性作用的因素.  相似文献   

Pollen-based Holocene quantitative temperature reconstruction on the eastern Tibetan Plateau using a comprehensive method framework     

Liang  Chen  Zhao  Yan  Qin  Feng  Zheng  Zhuo  Xiao  Xiayun  Ma  Chunmei  Li  Huan  Zhao  Wenwei 《中国科学:地球科学(英文版)》2020,63(8):1144-1160

Quantitative climate reconstruction on long timescales can provide important insights for understanding the climate variability and providing valuable data for simulations. Unfortunately, the credibility of some attempts was hampered by incomplete reconstruction procedures. We here establish a comprehensive framework resting on high-quality Chinese modern pollen database, including modern pollen data screening, calibration set selection, major climate factor analysis, appropriate model selection, strict statistical assessment of results and ecological interpretation. The application of this framework to three high-resolution pollen records from the eastern Tibetan Plateau allows accurate quantitative inferences of Holocene temperature changes, which is the major control of regional vegetation. The results show that the mean warmest month temperature(MTwa)during the early Holocene was ca. 10.4℃ and reached the highest value at 8.5–6 ka BP(ca. 11℃). The early and mid-Holocene(11–5 ka BP) warmth was followed by 1.2℃ temperature decrease, culminating in the coolest temperatures of the Holocene during the Neoglacial cooling. Superimposing on the general cooling trend, MTwareveals a significant 500-yr periodicity with varying intensities through time, showing that warm(cold) intervals are in phase with solar maxima(minima) periods. This spectral similarity indicates a possible connection of multi-century scale climate fluctuations with solar forcing.  相似文献   

Stratosphere amplifies the global climate effect of wildfires     

Wei  Ke  Chen  Wen  Xu  Luyang  Zhou  Chunjiang 《中国科学:地球科学(英文版)》2020,63(2):309-311

The summer of 2019 witnessed a great number of wildfires around the globe.For example,wildfires scorched huge swaths of Alaska,British Columbia in Canada,and parts of Greenland.And forest fires in Siberia and the Far East of Russia were also very serious,affecting nearly 3 million hectares of land,and putting some parts of Russia into a state of emergency.In particular,forest fires in the Amazon region had attracted global attention.According to Science,as of August 24,BraziPs National Institute for Space Research had counted more than 41000 fires this year,86%more than last year,compared with 22000 in the same period last year.Scientists in Brazil and elsewhere believe that the recent increase of wildfires is closely related to the increasing ac・tivities of deforestation(Arruda et al.,2019;Escobar,2019).  相似文献   

Evolution of internal solitary waves on the slope-shelf topography in the northern South China Sea     

Wang  Shuya  Meng  Jing  Li  Qun  Chen  Xu 《Ocean Dynamics》2020,70(6):729-743

Ocean Dynamics - Based on a non-hydrostatic two-dimensional and high-resolution model, evolution of internal solitary waves (ISWs) on the typical slope-shelf topography in the northern South China...  相似文献   

In situ LA-ICP-MS analyses of mica and wolframite from the Maoping tungsten deposit,southern Jiangxi,China     

Chen  Guanghong  Gao  Jianfeng  Lu  Jianjun  Zhang  Rongqing 《中国地球化学学报》2020,39(6):811-829

Acta Geochimica - The Maoping tungsten deposit is located in the Nanling W–Sn metallogenic belt in South China. Greisen and quartz vein types of mineralization developed in this deposit....  相似文献   

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite     

Jinquan Liu  Weizhong Chen  Zhiping Deng  Taogen Liu 《Marine Georesources & Geotechnology》2020,38(2):144-153

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.  相似文献   

Effect of nano-MgO on mechanical performance of cement stabilized silty clay     

Kai Yao  Dongliang An  Na Li  Chen Zhang  Aizhao Zhou 《Marine Georesources & Geotechnology》2020,38(2):250-255

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献